877-530-2366 | sales@BEMOUSA.com

BEMO Solar Systems

BEMO SOLUTIONS FOR ROOFTOP ENERGY GENERATION:
SUSTAINABLE, COST-EFFECTIVE AND SAFE.

BEMO-SOL is a highly cost-effective solar-thermal collector that is integrated into the building’s roof. The heat it collects can be utilized for low-temperature space heating and solar water heating systems. BEMO-SOL is also ideal for heating swimming pools, and delivers a rapid return on investment.

BEMO ROOFS ARE IDEAL FOR ENERGY
AND HEAT GENERATION.

EPDM tubes are integrated into the BEMO panels and transfer heat collected through the roof into the building via larger tubes. Temperatures up to 40°C/104˚F can be achieved. By adding a selective coating or a layer of glass above the panel it is possible to reach as much as 90°C/194˚F .

With the use of BEMO-AKKORD and BEMO-TOP profiles, energy and heat generation systems can be installed without puncturing the panels.

BEMO standing seam panels’ effective width can be varied, allowing you to choose rooftop solar modules of practically
any size.

BEMO-AKKORD – NO BOLTS, NO DRILLING, NO DAMAGE –
FOR HIGHLY DURABLE SOLAR ROOFS.

bemo-solar-01 bemo-solar-05 bemo-solar-04 bemo-solar-03 bemo-solar-02

No matter what make of photovoltaic module you choose, you can rest assured that it will be compatible with substructures comprising BEMO-AKKORD and BEMO-TOP mounting profiles. The effective width of BEMO’s standing seam panels can be varied in line with your chosen modules’ dimensions. Generally, a BEMO-AKKORD rail is installed on every other standing seam.

ROOFTOP SOLUTIONS FOR ALL LEADING SOLAR MODULES, MOUNTED AT THE SAME ANGLE AS THE PITCH OF THE ROOF.

BEMO mounting rails are made of aluminum, and are attached to omega profiles, that are themselves secured to the standing seams, using a roll former. No bolts or drilling are required, so there are no penetration points – with the exception of retaining brackets on the eaves. This protects your roof from corrosion, and eliminates the risk of leaks via hole elongation.

BEMO-AKKORD rails comprise a specially designed extruded mount and a sliding block. The sliding block can be inserted anywhere on the rail. The modules are held in place by clamping brackets attached to the sliding block using metric bolts. Cable clips attached to BEMO-AKKORD rails keep cables organized and away from rainwater.

The height of the standing seam, combined with the height of BEMO rails, ensures ample air circulation behind the solar modules. Furthermore, a wide flange on the upper side of the BEMO-TOP mounting profiles allows you to mount secondary systems using self-drilling screws.

The standing seam panels are manufactured in continuous lengths, so no overlap is required. This ensures high safety, even for low-pitch roofs.

bemo-solar-akkord-table

Award-winning revolution in roofing and wall design for free-form architecture.

Award-winning revolution in roofing and wall design for free-form architecture

BEMO USA

BEMO USA